Eclat StrongBarrier is a powerful polymer-modified elastomeric membrane that is formed mid-air with the emulsion and catalyst sprayed from a two - wand spray gun for a cost saving single coat application. It is touch-dry in minutes and reaches complete chemical cure within 24-48 hours forming a long-term, waterproof, corrosion preventative, puncture resistant membrane over virtually any substrate on any inclination. The membrane can be specifically formulated to achieve optimum situational performance; and the finished product can be easily colored via a wide variety of elastomeric paints to conform to aesthetic needs.​

 

For more details on our Eclat StrongBarrier product download the brochure here. 

Eclat MaxStrong is based on a unique blend of liquid epoxy polymer and aliphatic polyamine curing agents, which is able to displace water from wet surfaces in order to make a permanent bond. The formulation is solvent-free to ensure safety and maximum technical performance. It provides permanent protection under the most adverse conditions. The formula is uniquely field-friendly and uses advanced low toxicity ingredients in a high build spray, brush or rollable product.

 

For more details on our Eclat MaxStrong product click here or download the brochure here. 

Eclat MaxStrong 255 is a premium quality 100% solid epoxy coating designed for exacting duty in tough corrosive/erosive conditions. Pure liquid epoxy resins cured by aliphatic, advanced polyamine compounds and inert pigmentation are used for maximum chemical and physical properties. Exposure to water or high humidity during curing has no adverse effect on Eclat MaxStrong 255. Although proper surface preparation is always recommended for optimum performance Eclat MaxStrong 255 is so tolerant of substandard surfaces that it may easily be applied and cured underwater with good results.

 

For more details on our Eclat MaxStrong 255 product click here or download the brochure here.

Eclat Maxstrong 560 is based on a unique blend of liquid epoxy polymer and aliphatic polyamine curing agents, which is able to displace water from wet surfaces in order to make a permanent bond. The formulation is solvent-free to ensure safety and maximum technical performance. Eclat Maxstrong 560 provides permanent protection under the most adverse conditions.

 

For more details on our Eclat MaxStrong 560 product click here or download the brochure here. 

Eclat MaxStrong Metal Prime is a high quality, water-based, rust inhibiting, low VOC primer. It is a self cross-linking technology that provides low VOC levels with greater corrosion resistance and adhesion properties. It resists heat, cold, moisture and weathering. It also dries quickly for a reduced time before elastomeric coating application.

​

For more details on our Eclat MaxStrong Metal Prime product click here or download the brochure here. 

Eclat MaxStrong Zinc 390 is a Micaceous iron oxide (MIO)/zinc-pigmented, one component, moisture-cure polyurethane primer. For use over steel or weathered galvanized metal, or as a spot primer for marginally cleaned or blasted surfaces. It can be used for tank farms, chemical facility, pipes, structural steels and water treatment facilities

 

For more details on our Eclat MaxStrong Zinc 390 product click here or download the brochure here.