Cathodic Protection Solutions
CATHODIC PROTECTION
Description
Anode Galvanic
-
Magnesium Anode
-
Aluminium Anode
-
Zinc Anode
-
Extruded Ribbon
-
Anode - Boiler/Water heater
Anode Impressed Current
-
TI - Mixed Metal Oxide Anode
-
High Silicon Cast Iron Anode
-
Graphite Anode
-
Transformer Rectifier
-
Junction Box
-
Test Post
-
Reference Electrode
-
CP Cable
-
Carbon Backfill for ICCP
MaxStrong 560 TDS is based on a unique blend of liquid epoxy polymer and aliphatic polyamine curing agents, which is able to displace water from wet surfaces in order to make a permanent bond. The formulation is solvent-free to ensure safety and maximum technical performance.
TECHNICAL DATA
Vehicle Type:
Pigmentation:
Color:
Finish:
Thinner:
Cleaner:
Mixing Ratio:
Induction Time:
Pot Life:
Solids by Volume:
Epoxy/Alphatic amines
Color/Inert
Green, approximates Fed Std 595B #14110
High Gloss
Not Normally required
MEK or lacquer thinner
1:1 by volume
Not required
Approx. 40 min @ 77°F
100%
Spreading Rate/Gal:
Recommended Film Thickness:
Dry Time, (Dust Free):
Recoat Interval:
Dry Time, (Service):
Application Method:
Storage Conditions:
VOC:
1604 mil/sf/gal, 45.8 sf/gal @ 35 mils
35 - 40mils
4 hours at 77°F
No min, wet on wet OK, 48 hrs. max at 77°F *Abrade if max recoat interval is exceeded.
14 hrs. light, 72 hrs. heavy
Brush, roller, heated plural airless spray
Normal
Zero in normal application condition
Nigeria Office
Plot 16 block 128b New Creation rd, off Hon Adedeji street, Lekki Phase 1, Lagos, Nigeria
T. + 234 809 026 2183
USA Office
Eclat Holdings LLC
13532 Hargrave Road, Houston, TX
T. + 1.877.809.4243
Port Harcourt field office
Plot 14 Emekuku street
Oromineke, Layout D/Line
PortHarcourt, Nigeria